Easy as 1 2 3 to Fit..

See full Install Guide for more details

IF a degreaser is used for cleaning surfaces, ALL residue MUST BE REMOVED with a solvent before installation.

STEP 1: Click on Spacer

After the ftting surface's are cleaned, The Airtabs™ backing tape is peeled and they are clipped into the included spacers.

 

 

 

 

 


Spacer Templates can be joined together to save time.

STEP 2: Press and Stick

The spacing templates are lined up, Airtabs™ are pressed firmly on to the surface and the spacer template is removed.

STEP 3: Repeat!

Then simply repeat the process till you are done.
What tools are required to fit a truck and trailer?

• Sufficient Airtabs™ , spacing templates, tape measure and masking tape.
• Automotive soap & water, degreaser (if necessary), Varsol or any paint thinner (check with your manufacturer for surface compatibility).
• Supply of clean shop rags or equivalent paper product.
• Scaffolding or secure work platform (preferred) or ladder.
• Wheel chocks.

See Install Guide

 

Non standard fits..

 

For tractors without a top fairing:
If you look at the tractor/trailer from the front (head on) and you are able to see more than 24 inches of the trailer, then Airtabs™ is not appropriate for the tractor roof. By adding a fairing that matches the trailer height and then adding Airtabs™ you will see a significant benefit.

If you have questions, please call us (800) 475-2155.

 

Airtabs™ may be placed on the Wing. For placement on the Wing please click here.